WEBVTT
00:00:00.870 --> 00:00:04.490
In this video, our topic is energy conservation in circuits.
00:00:04.940 --> 00:00:09.170
The principle of energy conservation applies to all physical systems.
00:00:09.450 --> 00:00:17.080
And in this lesson, we’re going to learn two laws for electrical circuits that describe how energy is conserved in these cases.
00:00:17.480 --> 00:00:33.740
As we get started, let’s remind ourselves that energy conservation refers to this idea that the total energy possessed by a closed system is constant, where a closed system is some collection of objects where energy is neither added to that collection nor taken away.
00:00:34.210 --> 00:00:41.190
As an example of this, say that we have a system that consists of ourselves, a heavy rock, a staircase, and the ground.
00:00:41.690 --> 00:00:51.560
If we pick up this rock and start to climb the staircase, then we’re converting energy within our body to gravitational potential energy, both of ourselves as well as the rock.
00:00:51.950 --> 00:00:58.540
And then, if we release the rock, it will fall back to Earth and its gravitational potential energy is converted to kinetic energy.
00:00:58.890 --> 00:01:05.490
So we see then that within this closed system of these four objects, energy can be transferred from one type to another.
00:01:05.640 --> 00:01:09.590
But, nonetheless, the total energy possessed by this system is constant.
00:01:10.040 --> 00:01:13.600
And this principle holds true for electrical systems as well.
00:01:13.890 --> 00:01:21.870
If we think of an electrical circuit on a very small scale, we know that when there’s current in these circuits, that means there’s charge in motion through them.
00:01:22.280 --> 00:01:27.130
And the reason these charges move is because they’re exposed to a potential difference, what we can call 𝑉.
00:01:27.430 --> 00:01:35.320
If we think of a single charge 𝑄 moving through a potential difference 𝑉, then the electrical energy involved is equal to 𝑄 times 𝑉.
00:01:35.780 --> 00:01:47.390
And then, if we let this charge 𝑄 equal the total charge that passes a point in a circuit over some amount of time, then that ratio, 𝑄 divided by 𝑡, would be equal to the current 𝐼 in the circuit.
00:01:47.920 --> 00:01:56.840
Or multiplying both sides of the equation by the time 𝑡, the total charge passing a point in some amount of time is equal to the current times that time.
00:01:57.340 --> 00:02:08.150
And so if we substitute this expression for 𝑄 into our equation for electrical energy, we see that the electrical energy in the circuit is equal to current times time times potential difference.
00:02:08.600 --> 00:02:17.110
Two of these quantities, current and potential difference or voltage, are each the subject of an energy conservation law for circuits.
00:02:17.500 --> 00:02:22.520
These laws are known as Kirchhoff’s laws, and the first one has to do with current in a circuit.
00:02:22.910 --> 00:02:29.990
It says that whenever there is a junction in an electrical circuit, that would be where there’s a split in a circuit, so there’s more than one current path.
00:02:30.350 --> 00:02:34.940
Whenever that happens, the total current into the junction must equal the total current out.
00:02:35.480 --> 00:02:43.100
So, considering our circuit on screen, let’s say that this voltage source produces a current that we’ll call 𝐼 one in this direction.
00:02:43.490 --> 00:02:49.920
And then, let’s say that these two voltage sources working together generate a current 𝐼 two pointed this way.
00:02:50.370 --> 00:02:54.560
We can see that these two currents will meet here at this junction point in the circuit.
00:02:54.900 --> 00:03:01.970
When they do, a third current magnitude, we can call it 𝐼 three, will exist in this branch of the circuit moving down.
00:03:02.310 --> 00:03:10.990
So we can say that the total current moving into this junction, 𝐼 in, is equal to 𝐼 one plus 𝐼 two, while the total current coming out of it is 𝐼 three.
00:03:11.320 --> 00:03:19.490
And Kirchhoff’s first law, sometimes called Kirchhoff’s current law, says that in this case, 𝐼 one plus 𝐼 two is equal to 𝐼 three.
00:03:19.910 --> 00:03:23.420
The total current coming into the junction equals the total current coming out.
00:03:23.930 --> 00:03:29.510
This current law is always true no matter how many branches enter a junction and no matter how many leave.
00:03:29.920 --> 00:03:33.300
And we can connect this law with energy conservation like this.
00:03:33.540 --> 00:03:43.480
If we think of an individual electrical charge, an electron, moving along as part of one of these currents, that electron has a charge and it experiences a potential difference.
00:03:43.690 --> 00:03:46.050
So it has some amount of electrical energy.
00:03:46.380 --> 00:03:56.190
Now, let’s say that as this charge approaches the junction, rather than be diverted downward to become part of current 𝐼 three, somehow the charge gets stuck in the junction.
00:03:56.440 --> 00:04:04.300
If this happened, it would violate Kirchhoff’s current law because it would mean that the total current into this junction does not equal the total current out.
00:04:04.600 --> 00:04:10.280
But this would also mean that the total electrical energy into this junction doesn’t equal the total energy out.
00:04:10.740 --> 00:04:13.300
In other words, it would violate energy conservation.
00:04:13.660 --> 00:04:18.810
Physically, it’s not the case that charge is moving into a junction gets stuck and pile up there.
00:04:19.220 --> 00:04:22.760
Rather, any that do enter are able to exit as well.
00:04:23.000 --> 00:04:28.210
And this enables all three of these currents — 𝐼 one, 𝐼 two, and 𝐼 three — to exist.
00:04:28.640 --> 00:04:32.530
So that’s the first of Kirchhoff’s laws covering the current in a circuit.
00:04:32.710 --> 00:04:37.560
The second of these laws, which also has to do with energy conservation, describes voltage.
00:04:37.990 --> 00:04:45.530
Unlike Kirchhoff’s current law, where we look at junctions in electrical circuits, for the voltage law, we consider loops in a circuit.
00:04:46.220 --> 00:04:52.160
One of those loops we’ll look at is here on the left, and another is here on the right.
00:04:52.730 --> 00:04:56.620
And notice that each one of these loops has a direction we’ve associated with it.
00:04:56.900 --> 00:05:01.380
In each case, this arrow points in the direction that charge flows through that loop.
00:05:01.740 --> 00:05:08.250
So in this loop on the left, that charge flows clockwise, while in the loop on the right, that charge moves counterclockwise.
00:05:08.530 --> 00:05:13.600
And the direction of charge flow has to do with the direction of voltage sources in these loops.
00:05:13.970 --> 00:05:17.200
So let’s pick one of these two loops, say this one here.
00:05:17.480 --> 00:05:20.810
And we’ll follow an individual charge as it moves all throughout the loop.
00:05:21.220 --> 00:05:27.060
Now, let’s say that our charge starts right here at what we can call the negative terminal of our voltage source.
00:05:27.330 --> 00:05:32.500
As this charge moves across our voltage source, it experiences a rise in electrical potential.
00:05:32.910 --> 00:05:49.300
So if we sketch out a little graph of potential difference in this loop, where movement in this direction along our horizontal axis corresponds with clockwise motion around this loop, we can say that as a charge moves across our voltage source, it experiences a gain in potential.
00:05:49.710 --> 00:05:59.220
Then as the charge continues to move clockwise like this and then turns this corner and becomes part of the current 𝐼 three, there’s no gain or loss of electrical potential.
00:05:59.250 --> 00:06:01.520
So we’ll represent that with a horizontal segment.
00:06:01.950 --> 00:06:05.090
But then, our charge comes to encounter this resistor here.
00:06:05.370 --> 00:06:09.210
And let’s say that this resistor possesses a resistance, we’ll call 𝑅 one.
00:06:09.650 --> 00:06:14.520
As our charge moves from one end of the resistor to another, it will experience a drop in potential.
00:06:14.720 --> 00:06:20.640
And by Ohm’s law, this potential drop will be equal to the current through the resistor times the resistor value.
00:06:21.140 --> 00:06:24.810
So on our graph, we can plot that loss in potential like this.
00:06:24.970 --> 00:06:29.020
And we can say that the magnitude of that loss is 𝐼 three times 𝑅 one.
00:06:29.520 --> 00:06:33.600
So then, once our charge has crossed this resistor, it moves down to this junction point.
00:06:33.860 --> 00:06:41.030
And since we’re specifically considering this current loop, we’ll say that when our charge reaches this junction, it ends up going left out of it.
00:06:41.460 --> 00:06:43.120
Our charge then continues moving.
00:06:43.390 --> 00:06:47.160
And we can plot that on our sketch using this horizontal line segment.
00:06:47.470 --> 00:06:49.770
Once again, we’re not gaining or losing potential.
00:06:50.220 --> 00:06:59.250
But once our charge reaches this resistor, and we’ll say that this one has a resistance 𝑅 two, as the charge crosses over, it will experience a potential drop.
00:06:59.720 --> 00:07:07.450
And in magnitude, that drop will equal 𝐼 one, the current that exists through this resistor, multiplied by the resistance value 𝑅 two.
00:07:07.910 --> 00:07:11.830
Once our charge has made it through this last obstacle, it’s essentially home free.
00:07:12.190 --> 00:07:16.300
It can complete its circuit back at the negative terminal of our voltage supply.
00:07:16.780 --> 00:07:24.230
So if we look at our sketch of voltage across this current loop, we see that we start at zero and we also ended at zero volts.
00:07:24.460 --> 00:07:27.340
This is the essence of Kirchhoff’s voltage law.
00:07:27.870 --> 00:07:36.970
Also known as Kirchhoff’s second law, it says that the sum of emfs of voltage sources across a loop equals the sum of voltage drops across that same loop.
00:07:37.370 --> 00:07:43.260
And these drops, as we saw, are due to components in the circuit, for example, these resistors 𝑅 one and 𝑅 two.
00:07:43.820 --> 00:07:52.400
This law also connects with energy conservation because it says that the potential difference we put into a current loop is also the potential difference we take out of it.
00:07:52.820 --> 00:08:07.330
No matter how complicated a particular current loop, no matter how many sources of voltage and how many resistors and other components, if we do make a plot of potential difference across the complete loop, that plot will always start and end at the same level.
00:08:07.710 --> 00:08:09.880
That’s the meaning of Kirchhoff’s voltage law.
00:08:10.380 --> 00:08:16.740
Now, in a typical example exercise, it’s not necessary to graphically depict the voltage throughout the current loop.
00:08:17.010 --> 00:08:20.870
But instead, we often represent this change using symbols and algebra.
00:08:21.380 --> 00:08:28.480
Considering once again this current loop that we moved through, let’s say that our voltage supply generated a potential difference 𝑉.
00:08:28.910 --> 00:08:40.680
Applying Kirchhoff’s second law to this loop, we would then say that 𝑉, which is the sum of emfs of voltage sources in this particular loop, is equal to the sum of voltage drops across that same loop.
00:08:41.000 --> 00:08:47.030
And we saw that those two drops equal 𝐼 three times 𝑅 one and 𝐼 one times 𝑅 two, respectively.
00:08:47.400 --> 00:08:51.790
Writing the whole thing out this way, we could then solve for one of these values if it was unknown.
00:08:52.290 --> 00:08:59.680
Knowing all this, let’s get some practice now with Kirchhoff’s laws, which we could also call energy conservation laws for circuits.
00:09:00.190 --> 00:09:03.260
The current in three wires of the circuit shown are known.
00:09:03.540 --> 00:09:06.180
The currents 𝐼 one and 𝐼 two are unknown.
00:09:06.700 --> 00:09:07.890
Find 𝐼 one.
00:09:08.060 --> 00:09:09.110
Find 𝐼 two.
00:09:09.690 --> 00:09:14.140
So taking a look at this circuit, we see five different currents labeled.
00:09:14.500 --> 00:09:22.810
There are three that are known — this one here, 1.5 amps; this one here, 2.0 amps; and then this current, 2.5 amps.
00:09:23.220 --> 00:09:27.330
And along with this, there are two unknown currents, 𝐼 one and 𝐼 two.
00:09:27.950 --> 00:09:30.480
We want to solve for both of these unknown currents.
00:09:30.530 --> 00:09:35.650
And to do this, we can recall Kirchhoff’s current law, also called Kirchhoff’s first law.
00:09:36.120 --> 00:09:41.430
We can state this law in words like this: the current entering a junction equals the current leaving.
00:09:41.860 --> 00:09:51.720
This means that at any junction in an electrical circuit, if we add up all the currents moving into that junction point, that sum will equal the sum of all the currents leaving that point.
00:09:52.120 --> 00:09:59.620
We can apply this law to certain junction points in this circuit over here to answer the question of what is 𝐼 one and what is 𝐼 two.
00:10:00.040 --> 00:10:02.180
Let’s first solve for the current 𝐼 one.
00:10:02.430 --> 00:10:08.000
To do that, we’ll pick a junction point in this circuit, where 𝐼 one is either entering or leaving the junction.
00:10:08.240 --> 00:10:10.610
The junction we’ll pick is right here.
00:10:11.200 --> 00:10:15.570
At this location, we have these two currents entering and then current 𝐼 one leaving.
00:10:15.970 --> 00:10:27.520
If we apply Kirchhoff’s current law to this junction, we can say that the sum of currents entering it, 1.5 amps added to 2.5 amps, is equal to the sum of currents leaving this junction.
00:10:27.600 --> 00:10:30.090
But we see that only one is leaving, 𝐼 one.
00:10:30.550 --> 00:10:34.120
So then, 𝐼 one is the only current on the right side of our equation.
00:10:34.410 --> 00:10:39.060
And adding together 1.5 amps and 2.5 amps, we get 4.0 amps.
00:10:39.260 --> 00:10:41.400
This is the value of the current 𝐼 one.
00:10:41.900 --> 00:10:44.800
Now let’s use the same law to solve for current 𝐼 two.
00:10:45.180 --> 00:10:47.820
This time, we’ll pick a different junction point in our circuit.
00:10:48.150 --> 00:10:50.740
A good one to choose will be this junction right here.
00:10:51.170 --> 00:11:00.600
We can see that there are two currents, 𝐼 two, and then the current of 2.0 amps coming into this junction point and one current of 2.5 amperes leaving it.
00:11:01.080 --> 00:11:13.910
Once again, applying Kirchhoff’s current law, we can say that the sum of currents entering this junction is 𝐼 two added to 2.0 amps and that that equals the total current leaving, which we can see is 2.5 amps.
00:11:14.660 --> 00:11:23.310
Using this equation to solve for 𝐼 two, if we subtract 2.0 amps from both sides, we see then that 𝐼 two is equal to 0.5 amps.
00:11:23.640 --> 00:11:27.590
So 𝐼 one is 4.0 amps and 𝐼 two is 0.5 amps.
00:11:28.010 --> 00:11:30.360
Let’s look now at a second example exercise.
00:11:30.800 --> 00:11:37.560
The resistor in the circuit shown is powered by two batteries in parallel that have terminal voltages of 2.5 volts each.
00:11:37.860 --> 00:11:40.340
What is the potential drop across the resistor?
00:11:40.760 --> 00:11:46.580
So here in this circuit, we have these two batteries, here’s one and here’s the other, and they’re arranged in parallel.
00:11:46.710 --> 00:11:53.420
And they supply voltage to this resistor here so that there’s a potential drop of 𝑉 volts across the resistor.
00:11:53.930 --> 00:11:56.130
Our task is to solve for this value.
00:11:56.630 --> 00:11:59.680
And to do this, we can recall Kirchhoff’s voltage law.
00:12:00.140 --> 00:12:08.190
In words, this law says that the sum of emfs of voltage sources across a current loop equals the sum of potential drops.
00:12:08.470 --> 00:12:26.940
So this is saying that anytime we have a voltage source such as these two batteries in our circuit, then if we consider those sources in the context of a given current loop, the emfs supplied by the sources are equal to the sum of potential drops experienced throughout the rest of the loop due to circuit components such as resistors.
00:12:27.460 --> 00:12:35.810
Especially in our situation, considering only those voltage sources and circuit components that are part of the same current loop is very important.
00:12:36.230 --> 00:12:43.570
If we forget this part about the current loop, we might look at this circuit and say we have 2.5 volts here and 2.5 volts here.
00:12:43.800 --> 00:12:48.370
And both batteries seem oriented in the same direction, so we expect these voltages to combine.
00:12:48.530 --> 00:12:53.710
And so we might say then that 𝑉 is equal to the sum of these two voltages, 5.0 volts.
00:12:53.990 --> 00:13:01.190
But if we constrain ourselves to thinking in terms of current loops, as the voltage law tells us, then we’ll come up with a different response.
00:13:01.470 --> 00:13:06.450
In this circuit, there are two separate loops that contain both a battery as well as this resistor.
00:13:06.820 --> 00:13:10.210
Here’s one of those loops that includes the lower of the two batteries.
00:13:10.400 --> 00:13:11.910
And then, here’s the second loop.
00:13:12.440 --> 00:13:16.850
As we analyze this circuit, we’ll consider what’s going on in these two different loops separately.
00:13:17.370 --> 00:13:19.750
So first, let’s consider the interior loop.
00:13:19.810 --> 00:13:21.110
We’ll call this loop one.
00:13:21.510 --> 00:13:35.540
Following Kirchhoff’s voltage law, this says that the sum of emfs of voltage sources, which for this particular loop we can see is 2.5 volts, is equal — Kirchhoff’s voltage law says — to the sum of potential drops across this loop.
00:13:35.960 --> 00:13:40.790
As we look at loop one, we see that there’s only one circuit component where voltage drop can occur.
00:13:41.190 --> 00:13:42.900
It’s over this resistor here.
00:13:43.390 --> 00:13:46.810
And we’re told that that voltage drop is some amount we can call capital 𝑉.
00:13:47.100 --> 00:13:52.670
So then applying Kirchhoff’s voltage law to this first loop, we get 2.5 volts is equal to 𝑉.
00:13:53.070 --> 00:13:55.400
There are no other components in this current loop.
00:13:55.710 --> 00:14:00.680
So our answer is simply that 𝑉, the potential drop across the resistor, is 2.5 volts.
00:14:00.940 --> 00:14:05.250
But now, what if we consider the other loop, we can call that loop two, instead.
00:14:05.580 --> 00:14:13.730
If we did that and applied Kirchhoff’s voltage law, once again our sum of emfs of voltage sources around this loop would be 2.5 volts.
00:14:13.990 --> 00:14:18.710
And also just like before, the only component where this potential can drop is the resistor.
00:14:19.140 --> 00:14:23.230
And therefore, that potential drop, capital 𝑉, must be equal to 2.5 volts.
00:14:23.530 --> 00:14:30.740
So no matter which of the two loops we consider, we end up with the same answer that the potential drop across the resistor is 2.5 volts.
00:14:32.030 --> 00:14:35.720
Let’s summarize now what we’ve learned about energy conservation in circuits.
00:14:36.260 --> 00:14:41.690
In this lesson, we saw that energy conservation in circuits is described by Kirchhoff’s laws.
00:14:41.930 --> 00:14:50.450
The first of these, often called Kirchhoff’s current law, says that the total current entering a junction in a circuit equals the total current leaving that junction.
00:14:50.870 --> 00:15:00.210
So, for example, if we have a current junction like this with 𝐼 one and 𝐼 two entering and 𝐼 three leaving, then 𝐼 three must be equal to 𝐼 one plus 𝐼 two.
00:15:00.640 --> 00:15:03.620
The second of these laws is called Kirchhoff’s voltage law.
00:15:04.060 --> 00:15:11.710
This says that the sum of emfs of voltage sources across a current loop equals the sum of potential drops across that same loop.
00:15:12.180 --> 00:15:26.710
So, for example, in a circuit like this, where there’s just one loop of current, the total emfs supplied by voltage sources, what we’ve called 𝑉, is equal to the potential drops across the components of this loop — in this case, resistors 𝑅 one and 𝑅 two.
00:15:27.080 --> 00:15:30.090
This is a summary of energy conservation in circuits.