WEBVTT
00:00:00.400 --> 00:00:11.880
In this video, we will learn how to use the fact that the quadrant where an angle lies determines the sign of its trigonometric functions sine, cosine, and tangent to solve equations.
00:00:12.600 --> 00:00:16.440
Letβs start by thinking about what we know about angles on a coordinate plane.
00:00:17.280 --> 00:00:20.200
On a coordinate plane, the center is the origin.
00:00:20.840 --> 00:00:29.760
For standard angles measured in the coordinate plane, the positive π₯-axis will be the initial side, the starting point of our measurement.
00:00:30.560 --> 00:00:33.840
This positive π₯-axis and the beginning represents zero degrees.
00:00:34.520 --> 00:00:39.000
By the time we get to the positive π¦-axis, weβve gone 90 degrees.
00:00:39.760 --> 00:00:42.640
The negative π₯-axis will be 180 degrees.
00:00:43.240 --> 00:00:46.440
The negative π¦-axis will be 270 degrees.
00:00:47.240 --> 00:00:51.280
And all the way back around for a full turn is 360 degrees.
00:00:52.200 --> 00:00:58.640
In radians, that would be zero, π over two, π, three π over two, and then two π.
00:00:59.360 --> 00:01:04.760
The ray that represents where we stop measuring our angle is called the terminal side.
00:01:05.440 --> 00:01:10.280
And the angle and standard position will be located between the initial and terminal side.
00:01:11.080 --> 00:01:15.040
But we want to specifically consider angles that fall on the unit circle.
00:01:15.840 --> 00:01:19.600
The unit circle is centered at the origin and has a radius of one unit.
00:01:20.400 --> 00:01:26.960
For some coordinate π₯, π¦ in the first quadrant, the lengths π₯ and π¦ become the legs of a right triangle.
00:01:27.640 --> 00:01:33.080
And because we know that the radius of this circle is one, the hypotenuse of this right triangle will be one.
00:01:33.960 --> 00:01:48.080
If we label the side lengths here π₯ and π¦, we can take the Pythagorean theorem, which tells us π squared plus π squared equals π squared, in the unit circle π₯ squared plus π¦ squared equals one.
00:01:48.880 --> 00:01:55.000
We can also say that the equation of the unit circle must be π₯ squared plus π¦ squared equals one.
00:01:55.640 --> 00:02:02.880
But what we wanna do now is consider a bit of trigonometry with regards to the unit circle sine, cosine, and tangent.
00:02:03.520 --> 00:02:18.840
We know the sine of an angle represents the opposite side length over the hypotenuse, the cosine of an angle π represents the adjacent side length over the hypotenuse, and the tangent relationship of an angle is the opposite side length over the adjacent side length.
00:02:19.720 --> 00:02:27.240
For our angle π inside the unit circle, the opposite side length will always be the π¦-value, itβs the vertical leg.
00:02:27.880 --> 00:02:34.000
The sin of π is then π¦ over one since in the unit circle the hypotenuse is always one.
00:02:34.760 --> 00:02:38.280
sin of π is, therefore, equal to π¦ in the unit circle.
00:02:38.960 --> 00:02:43.000
Similarly, the adjacent side will be the horizontal leg, the π₯-value.
00:02:43.640 --> 00:02:48.480
And that means in the unit circle, the cos of π will be equal to π₯.
00:02:49.160 --> 00:02:52.600
And this means that the tan of angle π will be equal to π¦ over π₯.
00:02:53.560 --> 00:02:57.480
Before we look at some examples, thereβs one final thing we need to consider.
00:02:58.280 --> 00:02:59.960
And that is the sine of angles in quadrants.
00:03:00.520 --> 00:03:11.840
If we keep our unit circle, and we look at our π₯, π¦ in the first quadrant, in quadrant one, all π₯-values are positive and all π¦-values are positive.
00:03:12.360 --> 00:03:26.600
This means that the sin of π would be positive since π¦ is positive, the cos of π would be positive since π₯ is positive, and since π₯ and π¦ are both positive, the tan of π will also be positive.
00:03:27.040 --> 00:03:31.360
This means that in quadrant one, all trig relationships are positive.
00:03:31.880 --> 00:03:41.480
But as we move to quadrant two and create a right angle from the point negative π₯, π¦, weβre dealing with negative π₯-values and positive π¦-values.
00:03:42.160 --> 00:03:47.080
The π¦-value is positive in the second quadrant, making the sine value positive.
00:03:47.640 --> 00:03:49.280
But the π₯-value is negative.
00:03:49.680 --> 00:03:52.960
And that means in quadrant two, the cosine will be negative.
00:03:53.560 --> 00:03:58.480
With a positive value and a negative value, The tangent then becomes negative.
00:03:58.920 --> 00:04:06.280
So, we can generalize and say in quadrant two, the sine is positive but the cosine and tangent will be negative.
00:04:06.880 --> 00:04:11.400
Moving around to quadrant three, in quadrant three, the π₯-value and the π¦-value will be negative.
00:04:12.000 --> 00:04:15.680
This means the sine will be negative, the cosine will be negative.
00:04:16.160 --> 00:04:21.920
However, with tangent, negative π¦ over negative π₯ will be positive.
00:04:22.320 --> 00:04:28.200
And so, in quadrant three, sine and cosine are negative, while tangent is positive.
00:04:28.800 --> 00:04:34.920
And finally, in quadrant four, the π₯-values will be positive and the π¦-values will be negative.
00:04:35.640 --> 00:04:42.000
This gives us a negative sine value, a positive cosine value, and a negative tangent value.
00:04:42.840 --> 00:04:47.840
One way that you can remember these sine values is by using the CAST diagram that looks like this.
00:04:48.160 --> 00:04:52.360
The CAST diagram indicates which trig value will be positive in which quadrant.
00:04:53.040 --> 00:04:55.600
In quadrant one, all are positive.
00:04:56.080 --> 00:04:58.680
In quadrant two, sine is positive.
00:04:59.240 --> 00:05:01.880
In quadrant three, tangent is positive.
00:05:02.280 --> 00:05:04.960
And in quadrant four, cosine is positive.
00:05:05.680 --> 00:05:08.280
Now, weβre ready to consider some examples.
00:05:09.040 --> 00:05:18.520
Find sin of π, given π is in standard position and its terminal side passes through the point three-fifths, negative four-fifths.
00:05:19.360 --> 00:05:22.360
Itβs probably helpful here to sketch a coordinate plane.
00:05:22.880 --> 00:05:28.520
On this coordinate plane, we want to plot the point three-fifths, negative four-fifths, which is here.
00:05:29.080 --> 00:05:40.160
If we know that the terminal side of our angle goes through this point and that our angle is in standard position, then the initial side will be the ray that begins at the origin and goes through the positive π₯-axis.
00:05:40.720 --> 00:05:45.720
That means the angle weβre interested in is the space from the initial side to the terminal side.
00:05:46.240 --> 00:05:50.520
However, to calculate this, weβll form a right angle with the π₯-axis.
00:05:51.120 --> 00:05:54.240
When we do that, we end up with a right-angled triangle.
00:05:54.720 --> 00:05:57.720
And weβll use the angle created with the π₯-axis to solve.
00:05:58.520 --> 00:06:07.840
We can solve this using right-triangle trigonometry, where we have a right triangle with side lengths three-fifths and four-fifths.
00:06:08.280 --> 00:06:12.280
We remember that sin of π will be the opposite over the hypotenuse.
00:06:12.880 --> 00:06:15.600
However, we donβt currently know the hypotenuse.
00:06:15.840 --> 00:06:20.600
We donβt know the distance from the origin to the point three-fifths, negative four-fifths.
00:06:21.080 --> 00:06:29.120
We can use the Pythagorean theorem to find that, which means three-fifths squared plus four-fifths squared equals π squared.
00:06:29.800 --> 00:06:33.560
Nine twenty-fifths plus sixteen twenty-fifths equals π squared.
00:06:34.160 --> 00:06:36.240
25 over 25 equals one.
00:06:36.760 --> 00:06:40.200
And if π squared equals one, then π must be equal to one.
00:06:41.280 --> 00:06:47.200
Now that we know the hypotenuse is equal to one, we can say something else about this angle in our coordinate plane.
00:06:47.600 --> 00:06:49.680
And that is that our point falls on the unit circle.
00:06:50.200 --> 00:06:54.000
The unit circle has its center at the origin and has a radius of one.
00:06:54.480 --> 00:06:56.160
Weβre looking for the sin of π.
00:06:56.640 --> 00:06:58.840
Itβs equal to the opposite over the hypotenuse.
00:06:59.280 --> 00:07:04.240
Also in a unit circle, the sin of π is equal to its π¦-coordinate.
00:07:04.800 --> 00:07:07.880
The π¦-coordinate for this point is negative four-fifths.
00:07:08.400 --> 00:07:12.280
And so, we say that the sin of π equals negative four-fifths.
00:07:13.080 --> 00:07:29.520
And if we wanted to check this, we could remember based on our CAST diagram that for angles falling in the fourth quadrant, the cosine is positive, but the sine and tangent will be negative, which confirms that the sin of our angle π is equal to negative four-fifths.
00:07:30.320 --> 00:07:31.400
Letβs consider another example.
00:07:31.800 --> 00:07:36.560
Suppose π is a point on the unit circle corresponding to the angle four π over three.
00:07:37.040 --> 00:07:43.840
Is there another point on the unit circle representing an angle in the interval zero to two π that has the same tangent value?
00:07:44.400 --> 00:07:46.080
If yes, give the angle.
00:07:46.760 --> 00:07:55.120
First, we might wanna sketch a coordinate plane and then add a unit circle, which is a circle with the center at the origin and a radius of one.
00:07:55.960 --> 00:08:04.960
From there, we might also want to label our coordinate plane with radians beginning at zero, π over two, π, three π over two, and two π.
00:08:05.480 --> 00:08:11.000
Because we have the interval zero to two π, we know weβre only interested in one full turn.
00:08:11.440 --> 00:08:16.080
Our point π is on the unit circle and corresponds to the angle four π over three.
00:08:16.760 --> 00:08:21.640
This means our first job is to find out where the angle four π over three would land.
00:08:22.320 --> 00:08:33.360
I know for π over three is greater than π, but itβs probably worth comparing to find out if four π over three is greater than or less than three π over two.
00:08:34.040 --> 00:08:42.520
If we give these fractions common denominators, four π over two becomes eight π over six and three π over two becomes nine π over six.
00:08:43.000 --> 00:08:49.960
Since eight π over six is less than nine π over six, we can say that four π over three is less than three π over two.
00:08:50.440 --> 00:08:56.320
And that means point π is going to fall in our third quadrant and that four π over three would be this angle.
00:08:57.160 --> 00:09:06.640
Since we know that our angle falls in the third quadrant, we can use the CAST diagram, which will tell us that the tangent of the angle in the third quadrant is going to be positive.
00:09:07.240 --> 00:09:14.880
In order for us to find another point inside the unit circle that has the same tangent value, weβll be looking for the other place where the tangent value could be positive.
00:09:15.320 --> 00:09:16.640
And that will be in the first quadrant.
00:09:17.320 --> 00:09:20.720
In the first quadrant, all trig values will be positive.
00:09:21.520 --> 00:09:29.320
But in order for us to find what the value of that angle would be in the first quadrant, we need to break up our angle four π over three into smaller parts.
00:09:29.800 --> 00:09:36.840
We could say that four π over three is equal to π plus π over three, the distance from zero to π and then an additional π over three.
00:09:37.400 --> 00:09:43.840
The right triangle created inside the unit circle four π over three in the third quadrant would look like this.
00:09:44.680 --> 00:09:49.000
And in the first quadrant, there would be some point such that we would be dealing with the angle of π over three.
00:09:49.680 --> 00:09:52.920
In the first quadrant, that would have π₯, π¦ coordinates.
00:09:53.400 --> 00:09:57.520
And in the third quadrant, it would have negative π₯, negative π¦ coordinates.
00:09:58.200 --> 00:10:03.240
And we know that in a unit circle, the tan of π will be equal to π¦ over π₯.
00:10:03.560 --> 00:10:11.360
And we would say that the tan of four-thirds π is equal to negative π¦ over negative π₯ and the tan of π over three is equal to π¦ over π₯.
00:10:11.840 --> 00:10:16.080
But we simplify negative π¦ over negative π₯ to just π¦ π₯.
00:10:16.400 --> 00:10:22.080
And so, weβve shown that yes, there is another angle in this interval that has the same tangent value.
00:10:22.440 --> 00:10:23.720
And itβs the angle π over three.
00:10:24.440 --> 00:10:28.160
In our next example, weβll consider an application of the unit circle.
00:10:28.920 --> 00:10:32.240
Consider a windmill with the blades of length one meter.
00:10:32.720 --> 00:10:39.000
The position of the top π of a given blade is given by the coordinates π, π, which depends upon the angle π as shown.
00:10:39.720 --> 00:10:43.560
Express π and π as functions of the measure of angle π in radians.
00:10:44.200 --> 00:10:51.320
If angle π at a certain time is five-thirds π, what will it be after the blade has completed half a rotation?
00:10:52.360 --> 00:11:02.440
Because the length of the blades are one meter and in our diagram, this represents the radius of the windmill, we can use our knowledge of the unit circle to help us solve this problem.
00:11:02.960 --> 00:11:06.000
The distance from the center of the windmill to point π would be one.
00:11:06.480 --> 00:11:08.760
And weβre told that the point π is located at π, π.
00:11:08.960 --> 00:11:16.840
And so, we can create a right triangle with the π₯-axis and say that its side lengths are π and π, respectively.
00:11:17.680 --> 00:11:22.120
We use the distance from the terminal side to the π₯-axis to calculate the angle π.
00:11:22.840 --> 00:11:27.960
We know that in the unit circle, we can represent the angle as a sine and cosine relationship.
00:11:28.200 --> 00:11:36.360
For our angle π, the opposite side length would be π and its hypotenuse is one meter, so we have sin of π equals π over one.
00:11:36.840 --> 00:11:39.400
And we can represent π as sin of π.
00:11:40.320 --> 00:11:49.800
Similarly, if we look at cosine, we end up with the side length π over one, which means we can say that the distance π must be equal to the cos of the angle π.
00:11:50.680 --> 00:11:54.080
And without more information, this is as far as we can go with these two functions.
00:11:54.680 --> 00:11:59.360
We can say that π equals sin of π and π equals cos of π.
00:11:59.720 --> 00:12:08.920
Part two of our questions says if the angle of π at a certain time is five π over three, what will it be after the blade has completed a half a rotation?
00:12:09.640 --> 00:12:15.760
First of all, weβve already been told that weβre operating in radians, and so it might be helpful to label our coordinate plane.
00:12:16.400 --> 00:12:25.480
Beginning at the π₯-axis, zero radians, then π over two radians, π radians, three π over two radians, and a full turn, which is two π radians.
00:12:26.040 --> 00:12:28.480
In a system like this, a full turn is two π.
00:12:28.480 --> 00:12:33.040
And therefore, a half turn is going to be equal to π radians.
00:12:33.040 --> 00:12:40.440
If we start with the angle π five π over three radians and we add a half a rotation, weβre adding π to that angle.
00:12:41.160 --> 00:12:44.320
And just like adding any fractions, we need a common denominator.
00:12:44.720 --> 00:12:47.080
We can write π as three π over three.
00:12:47.600 --> 00:12:50.800
We add five π plus three π to get eight π.
00:12:51.360 --> 00:12:52.880
And the denominator wouldnβt change.
00:12:53.400 --> 00:12:57.400
The angle π after a half rotation would be eight π over three.
00:12:58.400 --> 00:13:00.640
Before we finish, letβs review our key points.
00:13:01.200 --> 00:13:06.120
The unit circle is a circle with the center at the origin and a radius of one unit.
00:13:06.640 --> 00:13:15.960
For any point on the unit circle π₯, π¦, the sin of the angle π created by that point will be equal to π¦ and the cos of angle π will be equal to π₯.
00:13:16.680 --> 00:13:20.400
Additionally, π₯ squared plus π¦ squared must equal one.
00:13:21.160 --> 00:13:27.480
We also saw that the CAST diagram can be used to identify the signs of trigonometric functions in each quadrant.