WEBVTT
00:00:01.420 --> 00:00:08.660
In this video, we’re going to learn about the normal reaction force, what it is, what it means, and how to calculate it.
00:00:09.450 --> 00:00:17.830
As we get started, imagine that you, as a designer of unique aquarium experiences, have come up with a new invention.
00:00:18.220 --> 00:00:26.650
You’ve developed a clear thin material strong enough for people to walk and stand on that you can put over the tank of an aquarium.
00:00:27.300 --> 00:00:32.000
The question is, how many people can be standing on this surface at one time?
00:00:32.770 --> 00:00:37.700
We can better understand this question through learning about the normal reaction force.
00:00:38.300 --> 00:00:44.570
The first thing to understand when it comes to this force, also called the normal force, has to do with its name.
00:00:45.120 --> 00:00:49.530
“Normal” doesn’t refer to words like “ordinary” or “standard” or “typical.”
00:00:49.760 --> 00:00:52.110
But actually it means perpendicular.
00:00:52.770 --> 00:00:57.970
This becomes more clear as we hear and learn phrases like normal to the surface.
00:00:58.430 --> 00:01:02.300
Speaking of surfaces, the normal force always involves one.
00:01:02.690 --> 00:01:07.760
The normal force is a contact force, meaning it requires two objects to be touching.
00:01:08.090 --> 00:01:10.090
And it’s also a response force.
00:01:10.330 --> 00:01:16.020
It’s the response of a surface to the force an object in contact with the surface exerts on it.
00:01:16.830 --> 00:01:22.530
Perhaps the simplest example of the normal force applies to an object at rest on a flat surface.
00:01:22.930 --> 00:01:28.440
The object has a weight force acting on it, tending to pull it down towards the center of the Earth.
00:01:28.930 --> 00:01:37.690
The surface that the object rests on resists or responds to this weight force with a force of its own, called the normal force.
00:01:37.860 --> 00:01:40.290
We sometimes abbreviate it with a capital 𝑁.
00:01:40.980 --> 00:01:47.850
In this scenario, the normal force is balancing out the weight force, so that vertically there is no acceleration of our object.
00:01:48.490 --> 00:01:54.290
But in general, the normal force is a response force to any kind of force, weight or not.
00:01:54.890 --> 00:02:00.400
Say, for example, that you took a block of wood and pressed it against a vertical wall with your hand.
00:02:00.930 --> 00:02:05.240
We could call the force that your hand exerts on the block 𝐹 sub 𝑃.
00:02:05.810 --> 00:02:10.100
And the normal force would be the response of the wall to that push.
00:02:10.600 --> 00:02:16.610
The three conditions for the normal force are that it is always perpendicular to a surface.
00:02:16.930 --> 00:02:22.370
It’s a contact force, meaning that it requires the interaction of an object with a surface.
00:02:22.980 --> 00:02:25.090
And it’s a response force.
00:02:25.160 --> 00:02:30.810
It’s the response of a surface to the forces acting on an object against that surface.
00:02:31.380 --> 00:02:34.990
The normal force can apply for any type of shape or curve.
00:02:35.550 --> 00:02:40.030
Say we have a rollercoaster route where the coaster goes through a loop.
00:02:40.680 --> 00:02:47.500
At any point along that loop, we can draw in a normal force of the track acting against the coaster cars.
00:02:47.940 --> 00:02:55.870
The conditions are again that it’s perpendicular to the track surface at that point, that there’s contact between the track and the car.
00:02:56.070 --> 00:02:59.500
And it’s in response to the forces of the car on the track.
00:03:00.150 --> 00:03:05.780
When we go to calculate the normal force in a given scenario, often we do that by inference.
00:03:05.940 --> 00:03:10.900
We infer the magnitude and direction of the normal force by the scenario we’re seeing.
00:03:11.560 --> 00:03:15.620
For example, say we have a block sliding down an inclined plane.
00:03:16.000 --> 00:03:22.010
We know there’s a normal force on the block from the plane acting perpendicular to the plane’s surface.
00:03:22.580 --> 00:03:28.220
To actually calculate the magnitude of the force though, we can’t start with the normal force itself.
00:03:28.470 --> 00:03:35.930
We start with the force that it opposes, which is the component of the weight force on the block perpendicular to the plane.
00:03:36.470 --> 00:03:46.570
It’s by solving for that component of the weight force and knowing that the block is not accelerating perpendicular to the plane that we’re able to find out the normal force magnitude.
00:03:47.130 --> 00:03:58.050
Often, as is the case with this inclined plane, we solve for the normal force magnitude based on the fact that our object is not accelerating perpendicular to the surface we’re considering.
00:03:58.730 --> 00:04:01.000
In other words, the forces balance out.
00:04:01.000 --> 00:04:02.230
They’re in equilibrium.
00:04:02.710 --> 00:04:05.840
But this isn’t always the case with the normal force.
00:04:06.280 --> 00:04:11.550
Say that we had a perfectly circular track with a car that moves around it at a speed 𝑉.
00:04:12.160 --> 00:04:18.150
In this case, there is still a normal force pushing the car towards the center of the circle as it goes around.
00:04:18.470 --> 00:04:22.440
But there is no balancing force pushing it out from the center of the circle.
00:04:22.960 --> 00:04:26.860
This doesn’t mean that there being a normal force is not valid in this case.
00:04:27.020 --> 00:04:30.700
It just means that the object, the car, is accelerating.
00:04:31.370 --> 00:04:37.680
We can consider that there are two tools we could call them for solving for normal force in different exercises.
00:04:38.270 --> 00:04:41.300
The first tool is a free body diagram.
00:04:41.460 --> 00:04:44.860
This is a picture of all the forces that are acting on an object.
00:04:45.240 --> 00:04:53.910
The second tool we often use is Newton’s second law of motion, that the net force acting on an object is equal to its mass times its acceleration.
00:04:54.440 --> 00:04:58.720
With these two tools in mind, let’s try a couple of normal force examples.
00:04:59.510 --> 00:05:05.170
A horizontal force is applied to a block that has a weight of 1.50 kilonewtons.
00:05:05.530 --> 00:05:11.720
The force holds the block at rest on a plane inclined at 30.0 degrees above the horizontal.
00:05:12.200 --> 00:05:16.040
Assuming no friction, calculate the normal force on the block.
00:05:16.580 --> 00:05:22.230
We can call this normal force capital 𝑁 and start out by drawing a diagram of the scenario.
00:05:22.810 --> 00:05:29.220
In this situation, our block sits on a plane inclined at 30.0 degrees above the horizontal.
00:05:29.790 --> 00:05:32.870
In total, there are three forces that act on the block.
00:05:33.120 --> 00:05:36.110
First, there’s its weight force pulling it straight down.
00:05:36.530 --> 00:05:41.030
We’re told we apply a horizontal force to the block we’ve called a capital 𝐹.
00:05:41.460 --> 00:05:45.490
And there’s also a normal force acting on the block from the inclined plane.
00:05:46.090 --> 00:05:48.410
We’re told the magnitude of the weight force.
00:05:48.440 --> 00:05:49.700
But we don’t know 𝐹.
00:05:49.730 --> 00:05:51.360
And we want to solve for 𝑁.
00:05:52.050 --> 00:05:57.030
We are told that, under the influence of these three forces, the block isn’t moving.
00:05:57.080 --> 00:05:59.790
It’s staying still in one place on the plane.
00:06:00.370 --> 00:06:05.910
In our diagram, we can insert coordinate axes to define positive and negative direction.
00:06:06.430 --> 00:06:11.130
We’ll say that positive motion in the 𝑦-direction is perpendicular to the plane.
00:06:11.400 --> 00:06:15.450
And positive motion in the 𝑥-direction is up the plane parallel to it.
00:06:16.030 --> 00:06:25.580
Our next task is to break up the forces that are not already aligned completely with one of these axes directions into components that are.
00:06:26.020 --> 00:06:33.920
First, we do that with our weight force, breaking it up into components that are in the 𝑥-direction and in the 𝑦-direction.
00:06:34.460 --> 00:06:43.450
We can know that the 30.0-degree angle we’ve been given, which we can call 𝜃, is equal to the angle in the upper-left corner of this triangle.
00:06:43.930 --> 00:06:52.370
If we do the same breakdown of our applied force 𝐹, we see it also can be divided into 𝑥- and 𝑦-components.
00:06:52.880 --> 00:06:59.060
Our next step will involve writing out force balance equations in the 𝑥- and in the 𝑦-directions.
00:06:59.490 --> 00:07:07.650
In the 𝑥-direction, the two forces we have are 𝐹 times the cos of 𝜃 and negative 𝑊 times the sin of 𝜃.
00:07:08.210 --> 00:07:19.060
If we recall Newton’s second law of motion, that the net force on an object is equal to its mass times its acceleration, we can apply this to the forces in the 𝑥-direction of our scenario.
00:07:19.510 --> 00:07:28.440
We can write that 𝐹 cos 𝜃 minus 𝑊 sin 𝜃 equals the mass of our block multiplied by its acceleration in the 𝑥-direction.
00:07:28.900 --> 00:07:33.350
We know though that because the block is motionless, this acceleration is zero.
00:07:33.810 --> 00:07:41.010
This means we can rewrite our equation and know that 𝐹 times the cos of 𝜃 is equal to 𝑊 times the sin of 𝜃.
00:07:41.560 --> 00:07:48.090
Or dividing both sides by the cos of 𝜃, 𝐹 is equal to 𝑊 times the tan of 𝜃.
00:07:48.650 --> 00:07:54.980
Both 𝑊, the weight force of the block, and 𝜃, the angle of the inclined plane, are given to us.
00:07:55.220 --> 00:07:58.560
So we’ve effectively solved for 𝐹, the applied force.
00:07:58.970 --> 00:08:03.870
Without calculating it numerically, we can move on to looking at forces in the 𝑦-direction.
00:08:04.190 --> 00:08:19.410
Applying Newton’s second law to the forces in the 𝑦-direction, we can write that the normal force 𝑁 minus 𝑊 times the cos of 𝜃 minus 𝐹 times the sin of 𝜃 is equal to the block’s mass multiplied by its acceleration in the 𝑦-direction.
00:08:19.890 --> 00:08:29.120
Again, we know that that acceleration is zero, which means that 𝑁, the normal force magnitude, is equal to 𝑊 cos 𝜃 plus 𝐹 sin 𝜃.
00:08:29.570 --> 00:08:40.620
If we substitute in for 𝐹, 𝑊 times the tangent of 𝜃, we now have an expression for 𝑁, what we want to solve for, in terms of known values 𝑊 and 𝜃.
00:08:41.120 --> 00:08:53.800
When we plug in 1.50 kilonewtons for 𝑊 and 30.0 degrees for 𝜃 and calculate this expression, we find that 𝑁 is 1.73 times 10 to the third newtons.
00:08:54.060 --> 00:08:57.630
That’s the magnitude of the normal force acting on the block.
00:08:58.190 --> 00:09:03.270
Now let’s look at an example where the object experiencing a normal force is in motion.
00:09:04.210 --> 00:09:10.240
A man with a mass of 75.0 kilograms measures his weight by standing on a bathroom scale.
00:09:10.610 --> 00:09:14.740
The man and the scale are inside an elevator that can move at different rates.
00:09:15.130 --> 00:09:24.640
What is the measurement of the man’s weight according to the scale if the elevator is accelerating vertically upward at a rate of 1.20 meters per second squared?
00:09:25.400 --> 00:09:34.100
What is the measurement of the man’s weight according to the scale if the elevator is moving vertically upward at a speed of 1.20 meters per second?
00:09:34.810 --> 00:09:44.210
What is the measurement of the man’s weight according to the scale if the elevator is accelerating vertically downward at a rate of 1.20 meters per second squared?
00:09:44.640 --> 00:09:49.090
We’re told the man’s mass in this example is 75.0 kilograms.
00:09:49.280 --> 00:09:50.430
We’ll call that 𝑚.
00:09:50.860 --> 00:09:59.610
In each of these three examples, we have a man standing on a scale inside an elevator that’s either moving up or downward.
00:10:00.340 --> 00:10:04.200
If we define motion up as motion in the positive direction.
00:10:04.750 --> 00:10:13.050
And if we call 𝑊 sub 𝑠 the weight of the man as recorded by the scale in the accelerating or constantly moving elevator.
00:10:13.480 --> 00:10:17.950
Then we want to solve for that weight reading of the scale under three conditions.
00:10:18.280 --> 00:10:24.060
First, when the elevator is accelerating at positive 1.20 meters per second squared.
00:10:24.590 --> 00:10:30.270
Second, when it’s moving at a constant velocity of positive 1.20 meters per second.
00:10:30.710 --> 00:10:38.820
And lastly, we want to solve for the reading on the scale when the elevator’s acceleration is negative 1.20 meters per second squared.
00:10:39.200 --> 00:10:50.120
What’s interesting about this scenario, looking back over to our diagram, is that if we were to draw the forces acting on the man, in all three cases, there are only two.
00:10:50.550 --> 00:10:55.150
There’s the gravitational force acting on the man, creating a weight force down on the scale.
00:10:55.410 --> 00:10:58.920
And then there’s the normal force of the scale, pushing up on the man.
00:10:59.380 --> 00:11:04.520
This normal force is equal in magnitude to the reading of the scale, 𝑊 sub 𝑠.
00:11:04.810 --> 00:11:14.620
To get started on our first solution, we can recall Newton’s second law of motion, which tells us that the net force on an object is equal to its mass times its acceleration.
00:11:14.920 --> 00:11:17.770
In our case, that object is the man.
00:11:18.030 --> 00:11:32.190
And when the elevator is accelerating vertically upward at 1.20 meters per second squared, we can write that the normal force acting on the man minus his weight force is equal to his mass multiplied by his acceleration.
00:11:32.590 --> 00:11:42.480
Since the man is at rest with respect to the elevator, we know that his acceleration matches the elevator’s, 1.20 meters per second squared, in the positive direction.
00:11:42.910 --> 00:11:47.340
Because we’re given the man’s mass, we also know the weight force he applies.
00:11:47.710 --> 00:11:54.940
And we know that the normal force exerted on the man is equal to the reading of the scale in this case, which is what we want to solve for.
00:11:55.370 --> 00:12:05.580
Recalling that the weight force of an object is equal to its mass times the acceleration due to gravity, we can rewrite our equation and then rearrange to solve for 𝑊 sub 𝑠.
00:12:05.900 --> 00:12:16.650
If we treat 𝑔 as exactly 9.8 meters per second squared, then we can plug in for 𝑚, 𝑔, and 𝑎 and solve for 𝑊 sub 𝑠.
00:12:17.020 --> 00:12:20.660
When we do, we find a value of 825 newtons.
00:12:20.980 --> 00:12:28.220
That’s the weight of the man registered by the scale when the elevator accelerates upward 1.20 meters per second squared.
00:12:28.740 --> 00:12:36.640
Next, we want to solve for the scale’s reading when the elevator is moving at a constant speed upward at 1.20 meters per second.
00:12:37.030 --> 00:12:50.820
In this case, looking back at our free body diagram of the man, we can write that the normal force acting on the man minus his weight force is equal to his mass times his acceleration, which is zero since the elevator is not accelerating.
00:12:51.250 --> 00:12:54.510
This means that the normal force is equal to the weight force.
00:12:54.700 --> 00:12:58.940
And we’ve said that the normal force is equal to the scale reading, 𝑊 sub 𝑠.
00:12:59.260 --> 00:13:07.790
So 𝑊 sub 𝑠 in this condition is equal to 𝑚 times 𝑔, or 75.0 kilograms times 9.8 meters per second squared.
00:13:08.110 --> 00:13:12.320
This is simply the weight of the man, 735 newtons.
00:13:12.790 --> 00:13:20.840
Finally, we want to solve for the scale’s reading when the elevator is accelerating downward at a rate of 1.20 meters per second squared.
00:13:21.360 --> 00:13:36.110
Starting with the equation 𝑁, the normal force, minus 𝑊, the weight force, is equal to 𝑚 times 𝑎, we can substitute in 𝑊𝑠 for 𝑁 and rearrange so that 𝑊𝑠 is equal to 𝑚 times the quantity 𝑔 plus 𝑎.
00:13:36.540 --> 00:13:42.250
When we plug in for these values, this time we have a value of negative 1.20 for 𝑎.
00:13:42.570 --> 00:13:48.070
And when we calculate 𝑊 sub 𝑠, we find it’s equal to 645 newtons.
00:13:48.310 --> 00:13:51.720
That’s the scale’s reading when the elevator accelerates downward.
00:13:52.450 --> 00:13:57.660
We see from these three results how the scale’s reading depends on the acceleration of the elevator.
00:13:58.160 --> 00:14:01.610
Let’s summarize what we’ve learned about the normal reaction force.
00:14:02.180 --> 00:14:10.490
We’ve seen that the normal reaction force, or normal force for short, is a contact force that acts in response to other forces.
00:14:10.960 --> 00:14:16.180
The normal force direction is always perpendicular to the surface that supplies the force.
00:14:16.640 --> 00:14:25.040
And we go about practically solving for the normal force using two tools: a free body diagram and Newton’s second law of motion.