WEBVTT
00:00:02.000 --> 00:00:06.770
In this video, we’re going to learn about SI unit multiples and submultiples.
00:00:07.000 --> 00:00:07.930
What they are.
00:00:07.970 --> 00:00:09.010
Why they’re important.
00:00:09.160 --> 00:00:11.440
And how to use them in example problems.
00:00:11.980 --> 00:00:18.350
To start off this topic, let’s first think about the importance of having a consistent set of units to work from.
00:00:18.740 --> 00:00:22.470
Imagine that we meet an architect, someone who designs homes.
00:00:22.770 --> 00:00:27.720
The architect is very excited to show us plans for a new house that she’s just designed.
00:00:28.130 --> 00:00:35.180
And let’s further imagine that when designing the house, the architect used a unit of distance called the splot.
00:00:35.570 --> 00:00:41.730
So one splot or two splots to represent different distances in the dimensions of the designed house.
00:00:42.100 --> 00:00:44.090
Now imagine that we come on scene.
00:00:44.090 --> 00:00:53.400
And our unit of measurement that we’re used to is not the splot, where we use a unit called a grang to measure distance rather than a splot.
00:00:53.830 --> 00:00:57.470
And clearly, one grang is not equal to one splot.
00:00:57.920 --> 00:01:03.080
Say that as we’re discussing the plans for the house, we ask the architect how tall it is.
00:01:03.320 --> 00:01:07.180
The architect responds: 13.8 splots.
00:01:07.600 --> 00:01:14.290
Now if we haven’t heard of splots and certainly don’t use it as a unit of measurement, this will be a very confusing answer to us.
00:01:14.670 --> 00:01:19.050
We might go and try to find out what one splot is, compared to a grang.
00:01:19.220 --> 00:01:23.700
And express the height of the house in a unit that made more sense and was more familiar to us.
00:01:24.140 --> 00:01:29.020
Now even if we did convert the height of the house into units the architect was more used to.
00:01:29.340 --> 00:01:35.210
Ideally, we’d both be able to agree on a common set of units to discuss the plans in.
00:01:35.840 --> 00:01:46.640
Having a common set of units to refer to will help us out whether we’re talking about units of distance or units of time or units of mass or really any measured quantity.
00:01:47.340 --> 00:01:52.280
It was with this goal in mind that the SI or System International set of units were developed.
00:01:52.310 --> 00:01:59.500
We see from the name that the intention is that this set of units be useful regardless of where we come from.
00:01:59.500 --> 00:02:03.820
The SI system has seven of what are called base units.
00:02:03.820 --> 00:02:09.230
The first base unit, the meter, measures length.
00:02:09.780 --> 00:02:11.550
The second measures time.
00:02:12.020 --> 00:02:15.000
The mole measures the amount of a substance.
00:02:15.330 --> 00:02:17.390
The ampere measures electric current.
00:02:17.800 --> 00:02:19.620
Kelvin measures temperature.
00:02:19.990 --> 00:02:25.140
The unit candela measures luminous intensity or brightness of a light source.
00:02:25.410 --> 00:02:28.770
And lastly, the kilogram is the unit that measures mass.
00:02:29.280 --> 00:02:35.130
Nearly any quantity that we would want to measure can be expressed in terms of these seven base units.
00:02:35.500 --> 00:02:47.180
For example, when we measure force, which is in units of newtons, that unit of newtons can be expressed in terms of the base units kilograms, meters, and seconds.
00:02:47.770 --> 00:02:52.790
So we’re at the point now where we have a common language for describing measured quantities.
00:02:53.060 --> 00:02:57.810
But we can go a step further in terms of being able to describe those measured numbers.
00:02:58.170 --> 00:03:01.010
Imagine that you purchase a green laser pointer.
00:03:01.300 --> 00:03:07.650
And as you open it out of the box and start trying the pointer out, you notice some writing on the side of the pointer.
00:03:08.430 --> 00:03:11.290
Looking more closely at the writing, you see it says.
00:03:11.500 --> 00:03:18.030
Wavelength 𝜆 equals 5.50 times 10 to the negative seventh meters.
00:03:18.480 --> 00:03:20.620
You recognize that unit, meters.
00:03:20.620 --> 00:03:23.220
It’s one of the base units in the SI system.
00:03:23.560 --> 00:03:26.270
And you recognize, roughly, how long a meter is.
00:03:26.640 --> 00:03:33.310
But the number in front of that unit, 5.50 times 10 to the negative seven, is a little bit hard to understand.
00:03:33.710 --> 00:03:35.540
It’s apparently very small.
00:03:35.540 --> 00:03:38.400
But it’s hard to get a feel for what that number means.
00:03:38.790 --> 00:03:44.310
This is where an extension, built on top of the SI system of base units, can help us.
00:03:44.650 --> 00:03:53.040
That is, we’ll be helped to understand what this wavelength number means by referring to SI unit multiples and submultiples.
00:03:53.400 --> 00:03:56.870
Let’s look at a table of those multiples and submultiples now.
00:03:57.360 --> 00:04:02.790
In this table on the left-hand side, we have multiples of SI units.
00:04:03.190 --> 00:04:06.530
And on the right-hand side, we have submultiples.
00:04:06.880 --> 00:04:10.390
Let’s look on the multiple side of the prefixes and their meanings.
00:04:10.920 --> 00:04:16.510
All the prefixes that we see apply to every single one of the seven SI base units.
00:04:16.940 --> 00:04:20.300
For example, we could have a hectometer.
00:04:20.650 --> 00:04:23.610
That would be 10 to the two or 100 meters.
00:04:24.140 --> 00:04:26.440
Or, we could have a gigasecond.
00:04:26.510 --> 00:04:29.770
That would be 10 to the ninth or a billion seconds.
00:04:30.310 --> 00:04:37.300
Or, we could have a peta-ampere, 10 to the 15th or a trillion thousand amperes.
00:04:37.780 --> 00:04:45.260
The purpose of these multiples is to help us be able to express and easily understand large measured values.
00:04:45.760 --> 00:04:53.240
In a similar way, the submultiples are designed to help us be able to easily express and understand small measured values.
00:04:53.680 --> 00:05:01.300
If we wanted to measure a very short distance, we might measure it in millimeters or 10 to the negative third meters.
00:05:02.000 --> 00:05:06.670
Very fast optical processes involve times measured in femtoseconds.
00:05:06.670 --> 00:05:10.640
That is, one thousandth of a trillionth of a second.
00:05:11.250 --> 00:05:19.750
And if you recall back to our green laser pointer, the value of the wavelength of that pointer might be better expressed in terms of a nanometer.
00:05:20.020 --> 00:05:21.950
That is, a billionth of a meter.
00:05:22.490 --> 00:05:27.050
It’s not necessary to have all the prefixes and their meanings memorized.
00:05:27.320 --> 00:05:31.610
But it is helpful to have a few in mind as we work through different exercises.
00:05:32.090 --> 00:05:36.710
Let’s get some practice using multiples and submultiples in a couple exercises now.
00:05:38.080 --> 00:05:44.810
25000000 meters squared equals blank kilometers squared.
00:05:45.360 --> 00:05:48.470
We want to solve for the value that goes in the blank.
00:05:48.700 --> 00:05:57.420
And to do that, we can recall that one meter, the SI base unit of distance, is equal to 10 to the negative third kilometers.
00:05:57.810 --> 00:06:11.080
So if we want to convert 25000000 meters squared into kilometers squared, we would multiply our original given number by that conversion factor two times over.
00:06:11.080 --> 00:06:16.330
Because we have a squared value, to express this number in kilometers squared.
00:06:17.150 --> 00:06:23.030
When we multiply these three numbers together, we find they equal 25.
00:06:23.790 --> 00:06:29.390
So 25 million meters squared is equal to 25 kilometers squared.
00:06:32.220 --> 00:06:36.230
Now let’s try a second exercise with multiples and submultiples.
00:06:38.120 --> 00:06:43.170
A device called an insolation meter is used to measure the intensity of sunlight.
00:06:43.650 --> 00:06:49.120
It has an area of 100 centimeters squared and registers 6.50 watts.
00:06:49.490 --> 00:06:52.400
What is the intensity in watts per meters squared?
00:06:53.190 --> 00:07:00.420
We’re given an area of 100 centimeters squared and a power rating of 6.50 watts.
00:07:00.930 --> 00:07:06.720
We want to express the intensity of this radiation in units of watts per meters squared.
00:07:07.000 --> 00:07:10.240
Though we’ve been given them in units of watts per centimeters squared.
00:07:10.770 --> 00:07:19.720
In terms of the given values, we can write that 𝐼, the intensity, is equal to 6.50 watts divided by 100 centimeters squared.
00:07:20.300 --> 00:07:31.270
To convert our denominator into units of meters squared, we can recall that one centimeter is equal to 10 to the negative two times our SI base unit of meters.
00:07:31.650 --> 00:07:40.770
That means if we take 100, the number of square centimeters given, and multiply it by 10 to the negative two two times.
00:07:41.190 --> 00:07:47.780
Then the product of those three numbers will equal a value in meters squared, the unit we’re interested in.
00:07:48.270 --> 00:07:56.530
When we multiply these three numbers together, we find that 100 centimeters squared is 1.01 [0.01] meters squared.
00:07:56.980 --> 00:08:04.340
That means we can rewrite our intensity as 6.50 watts divided by 1.01 [0.01] meters squared.
00:08:04.620 --> 00:08:10.730
And when we calculate this fraction, we find it’s equal to 650 watts per meters squared.
00:08:11.100 --> 00:08:14.680
That’s the intensity of the sunlight measured in these units.
00:08:17.880 --> 00:08:25.210
In summary of this topic, SI unit multiples and submultiples make number values easier to understand.
00:08:25.620 --> 00:08:29.380
It’s important to realize they don’t change the actual measured values.
00:08:29.610 --> 00:08:32.200
They just change the way those values are expressed.
00:08:32.770 --> 00:08:37.400
And we use them particularly with very large or very small numbers.
00:08:37.640 --> 00:08:40.070
That’s where their utility really comes through.