WEBVTT
00:00:00.430 --> 00:00:13.340
The Hall voltage measured by a Hall probe for a certain sample is 3.5 microvolts when a current of 2.7 amps and a magnetic field magnitude of 1.2 tesla is used to generate the Hall voltage.
00:00:13.740 --> 00:00:22.800
If a current of 2.1 amps generates a Hall voltage measurement of 3.0 microvolts for the same sample, what is the magnitude of the magnetic field?
00:00:23.340 --> 00:00:27.810
In this scenario, we can imagine we have a sample of material that looks something like this.
00:00:28.090 --> 00:00:37.000
And this sample of material is in a magnetic field, we can call it capital ๐ต, which points perpendicular to the largest cross-sectional area of that sample.
00:00:37.410 --> 00:00:42.460
In addition, current, we can call it capital ๐ผ, travels along the length of this sample.
00:00:42.720 --> 00:00:51.700
And under these conditions, as oppositely charged particles accumulate on the top and bottom of this sample, a Hall voltage across that distance is created.
00:00:52.050 --> 00:00:59.950
If we refer to the Hall voltage as ๐ sub ๐ป, then we can write down information for that voltage, the magnetic field and the corresponding current.
00:01:00.360 --> 00:01:05.700
In the first example described in our statement, the Hall voltage is 3.5 microvolts.
00:01:05.980 --> 00:01:12.340
That corresponds to a current of 2.7 amps and a magnetic field of 1.2 tesla.
00:01:13.190 --> 00:01:21.080
Then, in a separate example, we have a current of 2.1 amps and a measured Hall voltage of 3.0 microvolts.
00:01:21.330 --> 00:01:24.970
And we wanna solve for the magnetic field ๐ต in this second case.
00:01:25.210 --> 00:01:32.010
Weโre looking, then, for some mathematical relationship that ties together these three variables, Hall voltage, magnetic field, and current.
00:01:32.540 --> 00:01:36.810
Here is a mathematical relationship that does that, that connects these three values.
00:01:37.040 --> 00:02:00.900
We see the Hall voltage, ๐ sub ๐ป, is equal to the current through the sample multiplied by the magnetic field strength thatโs in multiplied by ๐, where ๐ is the distance from the top of the sample to the bottom, divided by ๐, the number density of charge carriers, in this case electrons in the current, multiplied by the charge of each of those charge carriers times ๐ด, which is the cross-sectional area of our sample.
00:02:01.450 --> 00:02:05.330
And here on our diagram, we show what particular cross section that is.
00:02:05.740 --> 00:02:08.940
We donโt know all the values for the terms in this expression.
00:02:09.180 --> 00:02:15.660
But given the information we have in these two examples, we have enough to solve for the unknown magnetic field ๐ต.
00:02:16.080 --> 00:02:22.890
To solve for the unknown magnetic field, we can use our equation for Hall voltage in each of our two example cases.
00:02:23.200 --> 00:02:29.660
Then, if we take the ratio of one instance to another, weโll have what we need to solve for the unknown magnetic field.
00:02:30.010 --> 00:02:37.770
Letโs start doing this by applying this equation for Hall voltage to the first set of information we have, the first row in this table weโve made.
00:02:38.200 --> 00:02:40.890
And to do that, letโs clear some space on screen.
00:02:41.320 --> 00:02:47.630
Now, what weโre going to do is use this equation for Hall voltage and fill in all the information we can, based on what we know.
00:02:47.990 --> 00:02:59.680
We can say that 3.5 microvolts is equal to 2.7 amps times 1.2 tesla times ๐, which we donโt know, divided by ๐ times ๐ times ๐ด, none of which we know for certain.
00:03:00.140 --> 00:03:06.680
Now, really, we could reasonably assume that ๐ with the charge on the charge carriers is the magnitude of the charge of an electron.
00:03:06.990 --> 00:03:11.780
But, as weโll see, we donโt need to plug in for that value because it will cancel out as we go along.
00:03:12.240 --> 00:03:16.850
So, this is our application of the Hall voltage equation for our first set of data.
00:03:17.270 --> 00:03:22.600
Now, letโs write a similar equation for our second set, again writing in all the information we have.
00:03:23.020 --> 00:03:35.800
In this case, we write 3.0 microvolts is equal to 2.1 amps times ๐ต, which we donโt know and want to solve for, times ๐, which we donโt know, all divided by ๐ times ๐ times ๐ด, which we also donโt know for sure.
00:03:36.330 --> 00:03:39.600
All these variables we donโt know for sure may seem to be an issue.
00:03:39.850 --> 00:03:44.160
But if we divide one of these equations by the other, then that issue goes away.
00:03:44.490 --> 00:03:53.520
Because, thanks to this division, their significant cancellation of terms, the ๐, the ๐, the ๐, and the ๐ด, all drop out of this expression.
00:03:53.850 --> 00:03:58.780
Looking at the expression that remains, we see that some more cancellation happens in terms of units.
00:03:59.110 --> 00:04:04.450
The microvolts units on the left-hand side cancels out and the amps unit on the right-hand side cancels.
00:04:04.810 --> 00:04:10.410
We have this remaining expression, which we then want to rearrange to solve for the magnetic field strength ๐ต.
00:04:10.660 --> 00:04:23.210
If we multiply both sides of the equation by ๐ต and then multiply both sides of the equation by 3.0 divided by 3.5, then what we find is, on the right-hand side, the term ๐ต cancels out.
00:04:23.320 --> 00:04:30.760
And on the left-hand side, the fraction 3.5 divided by 3.0 cancels with 3.0 divided by 3.5.
00:04:31.240 --> 00:04:34.580
In the end, we find this expression for the unknown magnetic field ๐ต.
00:04:34.660 --> 00:04:36.270
And weโre ready to calculate this field.
00:04:36.650 --> 00:04:40.920
When we do, we find that, to two significant figures, itโs one 1.3 tesla.
00:04:41.350 --> 00:04:48.640
Thatโs the magnetic field that fits in with a Hall voltage of 3.0 microvolts in a current through our sample of 2.1 amps.